============================================================================= AST RESEARCH, INC. TECHNICAL BULLETIN #0747 02-21-92 ============================================================================= RAMPAGEPLUS/MC AND DCA 3270/MC BOARD PROBLEM: When installing a DCA 3270/MC board in an IBM PS/2 system with a RampagePlus/MC board already installed, after completing the DCA 3270 installation, the memory previously supplied by the RampagePlus/MC board will no longer be counted during post. CAUSE: The ASTART.EXE program supplied with the RampagePlus/MC board does not correctly register memory on the IBM reference disk, which allows the DCA 3270/MC board to corrupt the RampagePlus/MC memory configuration. SOLUTION: Use the ASTART.EXE (version 1.21.01) available on the AST On- Line! BBS. (This is not an AST released driver, and AST makes no warranty regarding the usability of this driver).