SEAGATE TECHNOLOGY, INC. Customer Technical Support FAX Network +1 408 438-8137 Customer Technical Support Bulletin Boards (300-9600, 8-N-1) ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿ ³ United States +1 408 438-8771 ³ United Kingdom +44 628 478011 ³ ÃÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÅÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ´ ³ Germany +49 89 140-9331 ³ Singapore +65 227-2217 ³ ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÁÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ (C)opyright 1991 ST-157A /ÄÄÄÄÄÄÄ\ 6-pin jumper version ³O O O O³ À5ÄGÄGÄ12 ÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍ o o o ³::::::::::::::::::::1³ o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ³ ³ ³ ³ 0 1 Single Drive 0=open ³ 1 1 Dual-Drive Master 1=closed ³ 1 0 Dual-Drive Slave ³ ÀÄÄÄÄÄ Optional External LED /ÄÄÄÄÄÄÄ\ 10-pin jumper version ³O O O O³ À5ÄGÄGÄ12 ÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÑÍÍÍÍÍÍÍÍÍÍÍ o o o o o ³::::::::::::::::::::1³ o o o o o ÔÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ; ³ ³ ³ ³ ³ ³ ³ ³ ³ À LT (Life Test, factory use only) ³ ³ 0 1 Single Drive 0=open ³ ³ 1 1 Dual-Drive Master 1=closed ³ ³ 0 0 Dual-Drive Slave ³ ÀÄÄÄÄÄ EWS (factory use only) ÀÄÄÄÄÄÄÄ Active Busy (Optional External LED) ST - 157A UNFORMATTED CAPACITY (MB) ________________57 FORMATTED CAPACITY (26 SECTORS) (MB) _____44.7 ACTUATOR TYPE ____________________________STEPPER TRACKS ___________________________________3,360 CYLINDERS ________________________________560 HEADS ____________________________________6 DISCS ____________________________________3 MEDIA TYPE _______________________________THIN FILM RECORDING METHOD _________________________RLL (2,7) TRANSFER RATE (mbits/sec) ________________7.5 SPINDLE SPEED (RPM) ______________________3,600 AVERAGE LATENCY (mSEC) ___________________8.3 BUFFER ___________________________________2 Kbyte INTERFACE ________________________________AT BUS SECTORS PER DRIVE ________________________87,360 TPI (TRACKS PER INCH) ____________________824 BPI (BITS PER INCH) ______________________20,280 AVERAGE ACCESS (ms) ______________________40/28* SINGLE TRACK SEEK (ms) ___________________8 MAX FULL SEEK (ms) _______________________ /70 MTBF (power-on hours) ____________________150,000 POWER REQUIREMENTS: +12V START-UP (amps) _2.0 +12V TYPICAL (amps) __0.35 +5V TYPICAL (amps) ___0.9 TYPICAL (watts) ______9 MAXIMUM (watts) ______29 BUFFERED STEP PULSE RATE (micro sec) _____3-200 WRITE PRECOMP (cyl) ______________________N/A REDUCED WRITE CURRENT (cyl) ______________N/A LANDING ZONE (cyl)________________________AUTO PARK IBM AT DRIVE TYPE ________________________36,(or 14, 17 or 21)** *ST157A-0/ST157A-1 Possible translation: 733 cyl, 7 heads, 17 sectors = 44,660,224 Possible translation: 1024 cyl, 5 heads, 17 sectors = 44,564,480 Note: A "custom" or "user-definded" CMOS drivetype may ask for a numerical value for the Write Precompensation cylinder and for the Landing Zone cylinder. A basic rule-of-thumb for drive models that do not require the old Write Precomp technique or a Landing Zone because they are Auto-Parking is to add 1 to the cylinder value being used. As an example: If cylinders equaled 820, then both Write Precomp and Landing Zone would be entered as 821. Some BIOS will convert this to 65535 or -1, which are functionally equivalent to "none (not used)". ** MAY REQUIRE FORMATTING AND PARTITIONING SOFTWARE. ALSO, CHECK TO SEE IF YOUR CMOS SETUP HAS A "CUSTOM" OR "USER DEFINABLE" DRIVE TYPE AVAILABLE. PHYSICAL/LOGICAL equivalent to NATIVE/TRANSLATION WARNING - Already low-level formatted at the factory. Since a User-definable or Custom translation geometry may be used, it is imperative that the values be written down and kept with your permanent records for retrieval in the event of CMOS battery failure. Seagate reserves the right to change, without notice, product offerings or specifications. (6/26/90)