Icom U16 Programming --------------------------------------------------------------------------- The U16 is made programmable by moving a jumper inside the unit, then try holding [FUNC] down and entering 159357. You're now in programming mode. Exit program mode with [FUNC] + [CLR]. Function + 159357 Enter programming mode (Function = [FUNC] key) Function + [1] PL (CTCSS) Encoder tones (1-37) + [2] PL (CTCSS) Decoder tones (1-37) 1= 67.0 2= 71.9 3= 74.4 4= 77.0 5= 79.7 6= 82.5 7= 85.4 8= 88.5 9= 91.5 10= 94.8 11=100.0 12=103.5 13=107.2 14=110.9 15=114.8 16=118.8 17=123.0 18=127.3 19=131.8 20=136.5 21=141.3 22=146.2 23=151.4 24=156.7 25=162.2 26=167.9 27=173.8 28=179.9 29=186.2 30=192.8 31=203.5 32=210.7 33=218.1 34=225.7 35=233.6 36=241.8 37=250.3 (Tone 97.4 Not Available) + [3] ? + [4] Delta + / Delta - offset, 5 digits + [5] Frequency, 5 digits (400MHz +) + [6] ? + [7] Special Channel Number (allows alias ch.17-99 number) + [8] Transmit timeout enable. + [9] TI - Transmit Inhibit + [SCAN] Priority Scan/Ch Scan + [S.CH] Channel Masking + [CLEAR] End progamming mode --------------------------------------------------------------------------- Channel select: Standard method (up/down arrows or CH# + [ENTER]) Frequency: Hold [FUNC], Press [5], enter 6 dig freq, [ENTER], Release [FUNC] Rx CTCSS: Hold [FUNC], Press [2], enter 2 dig code, [ENTER], Release [FUNC] Tx CTCSS: Hold [FUNC], Press [1], enter 2 dig code, [ENTER], Release [FUNC] Offset Freq: Hold [FUNC], Press [4], use [#] for up offset, [*] for down offset, then enter freq to offset by (ie: [#] [0] [0] [0] [0] [0] for no offset, [#] [0] [5] [0] [0] [0] for the standard +5MHz UHF offset), [ENTER], Release [FUNC] Timeout Timer: Hold [FUNC], [8], Release [FUNC] Tx Inhibit: Hold [FUNC], [9], Release [FUNC] Special Ch. #: Hold [FUNC], Press [7], enter the special channel number (17-99), [ENTER], Release [FUNC] Data Transfer MASTER: Hold [FUNC], [BEEP], Release [FUNC] SLAVE: Hold [FUNC] with power off, turn on, Release [FUNC] --------------------------------------------------------------------------- -/Vuarnet International/- 617/527.oo91 24oo-16.8k HST/V32bis