The following debug session will alow you to copy the Newsroom files to any disk and run them from that disk. However, the Newroom program will still want you to enter the clip-art disks in drive A: and any banner, panel, or wire service disks in will also have to be put in drive A:. None of the disks need any copy protection, so therefore can be copied from disk to disk and still be run. Just follow the instructions carefully. First copy all the Newsroom files on to a clean disk. Also copy the Debug program on to the same disk. RENAME NWSRM.EXE 1 DEBUG 1 -E 691A EB 41 -E 6973 90 90 -E 6977 EB 25 90 - {THE FOLLOWING PORTION IS TELLING THE NEWSROOM DISK WHERE TO FIND CERTAIN FILES SUCH AS LOGO.PIC, NRTITLE.PIC, NRSETUP, ALONG WITH ALL THE PRINTER AND MODEM CONFIG TABLES.} AT THE FOLLOWING LOCATIONS ENTER THE APPROPRIATE HEX VALUE: FOR DRIVE A: 41 FOR DRIVE B: 42 FOR DRIVE C: 43 FOR DRIVE D: 44 -E 8F4B XX -E 92D2 XX -E 9316 XX -E 9349 XX -E 9354 XX -E 9B59 XX -E 9B66 XX -E 9B73 XX -E 9B8F XX -E 9BA5 XX -E 9CD4 XX -E 9D9D XX -E 9DAA XX -E 9DB7 XX -E 9DCE XX WHERE XX = THE DRIVE NUMBER DESIGNATED ABOVE -W -Q RENAME 1 NWSRM.EXE DEBUG NWSRM1.OVL -E 05DB 8B 46 04 89 46 FE 3B 46 04 -W -Q DEBUG NWSRM22.OVL -E 10C6 B8 05 43 -W -Q That's all there is to it. Now just copy it over to any disk you want and run it from there. Just remember that it is going to look for certain files on the drive that you told it before in the debug session.